HIGH VACUUM PUMPS
Two Stage: Produces 1-micron ultimate Pressure
Rotary Sliding Vane: Provides 85 liter per minute (3cfm) capacity and operates quietly
Direct Drive: Reduces space needed
Gas Ballast: Helps purge moisture from vacuum system
0-30” Hg Gauge: Check vacuum at the intake
Free Air Displacement: 85 liters per minute (3 cubic Feet per Minute)
Ultimate Vacuum: 1-micron laboratory conditions/better than 25 microns field conditions
Pump Speed: 1725 RPM
Motor: 1/2 HP 110V, 60Hz
Oil Capacity: 27oz. (785cc)
Operating Temperature: 30º F to 170ºF
Intake Port: 3/8” OD for 3/8” ID Tubing
Weight: 30 lbs.
Dimensions: 11” H x 14” L x 5 ¼” W (27.5cm x 35CM x 12.5cm)
|
LAV-3 |
HIGH VACUUM PUMP-3CFM-110V |
$ 650.00 |
|
LAV-3/G |
LAV-3 EQUIPPED WITH A 30" Hg GAUGE |
$ 680.00 |
|
LAV-3/220 |
HIGH VACUUM PUMP-3CFM-220V |
$ 699.00 |
|
LAV-3/220/G |
LAV-3/220 EQUIPPED WITH A 30" Hg GAUGE |
$ 730.00 |
HIGH VACUUM PUMP PLATES AND ACCESSORIES
NOTE: SEE PRICE LIST AT THE BOTTOM OF THE PRODUCT DESCRIPTIONS.
ACRYLIC HIGH VACUUM PUMP PLATE:
Material: Acrylic Base, ¼” ID Brass Hose Barb, 4ea. Suction Cup Base Stands
Weight: 4 lb.
Dimensions: 10-3/4” Diameter Base x 1-1/2” High (27cm D x 4cm H)
Intake Port: 3/8” OD for 3/8” ID Vacuum Tubing
Use with Bell Jars up to 9” in Diameter
CAST IRON HIGH VACUUM PUMP PLATE
v Accommodates Bell Jars up to 9” Diameter
v Sturdy ½” Steel Plate Ground Flat
v Nickel Plated For Corrosion Resistance
v 3/8” Barbed Hose Connection
v Vacuum Release Valve
v Rubber Gasket for Tight Seal
DIGITAL HIGH VACUUM GAUGE
Gauge Features:
· Digital Display With Solid State Circuitry
· Vacuum Range 25-12000 Microns
· Reads vacuum in 7 International Units: Microns, PSIA, InHg, mBars, Pascals, Torr, mTorr
· +32°F to +120°F Ambient Temperature
· NIST Traceable
· Solid State Design- No Adjustment Necessary For Temperature
· 10 Minute Automatic Power Off Battery Saver
· Saves Last Vacuum Readout After Shutdown
· 800 PSI Maximum Pressure
· Sealed Touch Buttons Protects Against Spills and Dust
· Retractable Hanging Hook
· Uses One 9 volt Battery (not included)
HIGH VACUUM EXHAUST FILTER
FEATURES:
 | Eliminates smoke from the high vacuum pump exhaust by removing oil mists |
| Durable Nylon Guard |
| Protects the working environment |
| Reduces noise levels |
| Temperature resistant up to 121° C |
| Retention efficiency of 99.9% at 0.1mm with low flow resistance |
HIGH VACUUM PUMP OIL
THIS OIL IS RECOMMENDED FOR USE WITH ALL OF OUR VACUUM PUMPS. CLICK HERE FOR MSDS.
|
OIL-01 |
HIGH VACUUM PUMP OIL – 1 QUART |
$ 25.00 |
|
OIL-012 |
HIGH VACUUM PUMP OIL-12 QUART |
$ 99.00 |
|
GA-001 |
HIGH VACUUM PUMP PLATE, CAST IRON |
$ 229.00 |
|
GA-RUBGAS |
REPLACEMENT RUBBER GASKET FOR GA-001 |
$ 11.70 |
|
AP-001 |
ACRYLIC HIGH VACUUM PUMP PLATE |
$ 89.00 |
|
HVG-001 |
HIGH VACUUM HAND HELD DIGITAL GAUGE |
$ 325.00 |
|
LAV-EF |
HIGH VACUUM EXHAUST FILTER |
$ 135.00 |